Important Announcement: Effective from 12 September 2024, SSGC has revised its Fee/ Chagres for Press & Normal Tender, mentioned below.
Document Fee/Charges for Press Tender: The sale price of press tender documents is revised from Rs. 2,000 to Rs. 3,000.
Document Fee/Charges for Normal Tender: The price for normal tender documents is revised from Rs. 1,000 to Rs. 1,500.
V2: Note: As per SRO296(1)/2023 dated 08th March 2023 “E-Pak Procurement Regulations, 2023” all bidders are advised to register in e-Pak Acquisition and Disposal System (EPADS)
Important Notice:
Effective from June 20, 2025, as per PPRA directives, SSGC will only conduct all procurements exclusively through the E-Pak Acquisition and Disposal System (EPADS). All suppliers/ bidders must register at https://eprocure.gov.pk/#/supplier/registration to continue doing business with SSGC.
Special Note:
In case of any grievances suppliers/ bidders must file grievances through EPADS for EPADS tenders. Grievances submitted through any other platform will not be entertained
Supply, Installation, Testing & Commissioning of 200-230 KVA Gas Engine Generators, 400/230 Volt, 50 Hz, 3 Phase, 4 Wire, Neutral Ground with Imported Sound Proof Canopy, Qty= 1 for each Lot. (Total = 2 Lots) (On Lot Wise Package Basis) (On Turnkey Basis) (on FOB/C&F/FOR Basis) (Under Single Stage Two Envelope Bidding Procedure).
Portable Air Compressor, Single-Stage, Oil Injected, Rotary Screw, Liquid-Cooled, Four Cylinder, Diesel Engine, Working Pressure: ≥5 ≤11 Bar OR (≥70 ≤155 Psi), Steel Fuel Tank Capacity ≥60 ≤110 Liters, Qty=4 Nos. (As per Specification) (Under Single Stage Two Envelope Bidding Procedure).
FOB/C&F/FOR(Only for Local Manufacturers as per SRO 827(1)/2001)
DIFFERENT TYPES OF SPARES FOR ZOOMLION CRANE & SHANTUI EXCAVATOR (i.e. FUEL FILTER, FUEL COARSE FILTER, OIL FILTER, FUEL WATER SEPARATOR, BREATHER VALVE FILTER 1ST/2nd, ELEMENT PILOT HYDRAULIC, RETURN OIL FILTER, AIR FILTER OUTER/INNER, BREAKER HAMMER FILTER, AC FILTER, BELT (FAN/AC), T/Item=14 & T/Qty=84 Nos. (Under Single Stage One Envelope Bidding Procedure) (The bidder is required to submit/upload the valid PEC Certificate mentioned in the Tender Document/Advertisement (where required) along with the bid on EPADS; otherwise, the bid will be liable for rejection. This tender is available on the EPADS link. Bidder(s) should participate in this tender through EPADS. The bidder should download the tender document through EPADS, fill out the BOQ/Bid form/Schedule of Requirement, upload all tender documents duly signed and stamped through EPADS; otherwise, the bid will be liable for rejection.” “The bidder must deposit/submit the physical bid bond to the Tender Room (SSGC HO) before the bid submission Time; otherwise, the bid will be liable for rejection)
Pre-Qualification for Air Travel Agents for SSGC (As per Criteria/TOR) (Under Single Stage One Envelope Bidding Procedure).
The bidder is required to submit/upload the valid PEC Certificate mentioned in the Tender Document/Advertisement (where required) along with the bid on EPADS; otherwise, the bid will be liable for rejection. This tender is available on the EPADS link. Bidder(s) should participate in this tender through EPADS. The bidder should download the tender document through EPADS, fill out the BOQ/Bid form/Schedule of Requirement, upload all tender documents duly signed and stamped through EPADS; otherwise, the bid will be liable for rejection.” “The bidder must deposit/submit the physical bid bond to the Tender Room (SSGC HO) before the bid submission Time; otherwise, the bid will be liable for rejection.”
♦ ROOM HEATER (GAS), DOUBLE PLATE BURNER, 22GAUGE M.S. SHEET, BROWN MET, STANDARD SIZE, BURNERS WITH SEPARATE KNOBS., Qty=08 Nos. ♦ BELT ALIGNMENT KIT, RED LASER DIODE, 1xBUILT-INCLASS 2 LASER, & It; 1mW, 632 nM, 3 m at 2 m (9.8 ft at 6.6 ft), BETTER THAN 0,2" % 0,5 mm (0.02 in.), 50 MM to 6000MM (2 in. TO 20 ft) LASER ON/OFF SWITCH, Qty=02 Nos. ♦ TOOL KIT FOR INSTRUMENTS & CONTROL WORK, TOTAL PIECES: 95, 1/4" 6PT., FLANK SOCKETS: 3.2-4-5-5.5-6-7-8-9-10-11-12-13-14 MM, 1/4" BIT (25MML) HEX 3-4-5-6-8 MM, PART # 50230-95, Qty=01 No. (As per specification) (Under Single Stage One Envelope Bidding Procedure) (The bidder is required to submit/upload the valid PEC Certificate mentioned in the Tender Document/Advertisement (where required) along with the bid on EPADS; otherwise, the bid will be liable for rejection. This tender is available on the EPADS link. Bidder(s) should participate in this tender through EPADS. The bidder should download the tender document through EPADS, fill out the BOQ/Bid form/Schedule of Requirement, upload all tender documents duly signed and stamped through EPADS; otherwise, the bid will be liable for rejection.” “The bidder must deposit/submit the physical bid bond to the Tender Room (SSGC HO) before the bid submission Time; otherwise, the bid will be liable for rejection)
DIFFERENT TYPES OF SPARES FOR COOLING TOWER (HVAC SYSTEM) (i.e. V-BELT, FAN HUB BEARING, BASE+SOLIDIFIER, BEARING COOLING TOWER MOTOR, BEARING CHILLER BLOWER MOTOR, BEARING FOR MOTOR, CONDENSER MOTOR BEARING & SHAFT CARBON STEEL), T/Item=12 & T/Qty=150. (Under Single Stage One Envelope Bidding Procedure) (The bidder is required to submit/upload the valid PEC Certificate mentioned in the Tender Document/Advertisement (where required) along with the bid on EPADS; otherwise, the bid will be liable for rejection. This tender is available on the EPADS link. Bidder(s) should participate in this tender through EPADS. The bidder should download the tender document through EPADS, fill out the BOQ/Bid form/Schedule of Requirement, upload all tender documents duly signed and stamped through EPADS; otherwise, the bid will be liable for rejection.” “The bidder must deposit/submit the physical bid bond to the Tender Room (SSGC HO) before the bid submission Time; otherwise, the bid will be liable for rejection)
Engaging The Services of Testing Service Provider (TSP) (as per BOQ/ Criteria) (Under Single Stage Two Envelope Bidding Procedure) (On Complete Package Basis)
The bidder is required to submit/upload the valid PEC Certificate mentioned in the Tender Document/Advertisement (where required) along with the bid on EPADS; otherwise, the bid will be liable for rejection. This tender is available on the EPADS link. Bidder(s) should participate in this tender through EPADS. The bidder should download the tender document through EPADS, fill out the BOQ/Bid form/Schedule of Requirement, upload all tender documents duly signed and stamped through EPADS; otherwise, the bid will be liable for rejection.” “The bidder must deposit/submit the physical bid bond to the Tender Room (SSGC HO) before the bid submission Time; otherwise, the bid will be liable for rejection.”
Construction / Installation of Deep well Ground Beds 03 Nos. on Transmission Pipeline network (Nawabshah, Shikarpur, Larkana)(As per BOQ) (Having Valid PEC in Category C-6 or Above) (Under Single Stage One Envelope Bidding Procedure) (On Lot wise Package Basis).
The bidder is required to submit/upload the valid PEC Certificate mentioned in the Tender Document/Advertisement (where required) along with the bid on EPADS; otherwise, the bid will be liable for rejection. This tender is available on the EPADS link. Bidder(s) should participate in this tender through EPADS. The bidder should download the tender document through EPADS, fill out the BOQ/Bid form/Schedule of Requirement, upload all tender documents duly signed and stamped through EPADS; otherwise, the bid will be liable for rejection.” “The bidder must deposit/submit the physical bid bond to the Tender Room (SSGC HO) before the bid submission Time; otherwise, the bid will be liable for rejection.”
Civil Works for Upgradation of SMS Sukkur, SMS Padidan, SMS Tando Allahyar (as per BOQ/ Criteria)( Having Valid PEC in Category C-6 or Above CE-10) (Under Single Stage Two Envelope Bidding Procedure) (On Complete Package Basis)
The bidder is required to submit/upload the valid PEC Certificate mentioned in the Tender Document/Advertisement (where required) along with the bid on EPADS; otherwise, the bid will be liable for rejection. This tender is available on the EPADS link. Bidder(s) should participate in this tender through EPADS. The bidder should download the tender document through EPADS, fill out the BOQ/Bid form/Schedule of Requirement, upload all tender documents duly signed and stamped through EPADS; otherwise, the bid will be liable for rejection.” “The bidder must deposit/submit the physical bid bond to the Tender Room (SSGC HO) before the bid submission Time; otherwise, the bid will be liable for rejection.”
Civil and Electrical Works for Renovation of T-3/11 Bungalow, Fixing of CC Pavers & Construction of MS Parking Shed at K.T (As per BOQ) (Having Valid PEC in Category C-6 or above with Sub Category CE-10) (Under Single Stage One Envelope Bidding Procedure) (On Complete Package Basis).
The bidder is required to submit/upload the valid PEC Certificate mentioned in the Tender Document/Advertisement (where required) along with the bid on EPADS; otherwise, the bid will be liable for rejection. This tender is available on the EPADS link. Bidder(s) should participate in this tender through EPADS. The bidder should download the tender document through EPADS, fill out the BOQ/Bid form/Schedule of Requirement, upload all tender documents duly signed and stamped through EPADS; otherwise, the bid will be liable for rejection.” “The bidder must deposit/submit the physical bid bond to the Tender Room (SSGC HO) before the bid submission Time; otherwise, the bid will be liable for rejection.”
Different Types of Workshop Tools (i.e. WRENCH PIPE 10", 14" & 12", CHIESEL STEEL 12", HAMMER 1.1/2 LB & ELECTRIC PHASE TESTER 4" SIZE), T/Item=06 & T/Qty=190 Nos. (Under Single Stage One Envelope Bidding Procedure) (The bidder is required to submit/upload the valid PEC Certificate mentioned in the Tender Document/Advertisement (where required) along with the bid on EPADS; otherwise, the bid will be liable for rejection. This tender is available on the EPADS link. Bidder(s) should participate in this tender through EPADS. The bidder should download the tender document through EPADS, fill out the BOQ/Bid form/Schedule of Requirement, upload all tender documents duly signed and stamped through EPADS; otherwise, the bid will be liable for rejection.” “The bidder must deposit/submit the physical bid bond to the Tender Room (SSGC HO) before the bid submission Time; otherwise, the bid will be liable for rejection)
INSTALLATION & CONFIGURATION & UP-GRADATION OF RACK MOUNTABLE EMS ROOM ALERT DEVICE MIN. 8 DIGITAL SENSOR PORTS (RJ-11), MIN. 16 SWITCH SENSOR PORTS (SCREW TERMINAL BLOCKS), MIN. 2 ANALOG SENSOR PORTS, Qty=01 Job/Lot. (Bidder must be local dealer / distributor for quoted product) (Tender is on package basis) (Turnkey Installation required) (Under Single Stage One Envelope Bidding Procedure) (The bidder is required to submit/upload the valid PEC Certificate mentioned in the Tender Document/Advertisement (where required) along with the bid on EPADS; otherwise, the bid will be liable for rejection. This tender is available on the EPADS link. Bidder(s) should participate in this tender through EPADS. The bidder should download the tender document through EPADS, fill out the BOQ/Bid form/Schedule of Requirement, upload all tender documents duly signed and stamped through EPADS; otherwise, the bid will be liable for rejection.” “The bidder must deposit/submit the physical bid bond to the Tender Room (SSGC HO) before the bid submission Time; otherwise, the bid will be liable for rejection)
Meter Prover (Software Operated), complete in all respect and its FAT, Qty=1 No. (As per Specification) (On Complete Package Basis) (Under Single Stage Two Envelope Bidding Procedure) FOB/C&F/FOR(Only for Local Manufacturers as per SRO 827(1)/2001)
SPARES FOR WELKER PROBE: ♦ REPAIR KIT FOR IRA-4SS P.NO RKIRA4SSB, Qty=10 Nos. ♦ O-RING KIT FOR IRA-4SS P.NO OKIRA4SS, Qty=20 Nos. (As per specification) (Bidder shall provide authorization certificate from OEM) (Under Single Stage One Envelope Bidding Procedure) (The bidder is required to submit/upload the valid PEC Certificate mentioned in the Tender Document/Advertisement (where required) along with the bid on EPADS; otherwise, the bid will be liable for rejection. This tender is available on the EPADS link. Bidder(s) should participate in this tender through EPADS. The bidder should download the tender document through EPADS, fill out the BOQ/Bid form/Schedule of Requirement, upload all tender documents duly signed and stamped through EPADS; otherwise, the bid will be liable for rejection.” “The bidder must deposit/submit the physical bid bond to the Tender Room (SSGC HO) before the bid submission Time; otherwise, the bid will be liable for rejection)
♦CHEMICALS FOR MITSUBISHI DIRECT GAS ABSOPTION CHILLER MOD.MGS 50(C): LITHIUM CHROMATE CONCENTRATION 30%, Qty=50 Kg. ♦ CHEMICAL FOR HVAC SYSTEM: OPEN CIRCUIT, SCALE AND CORROSION INHIBITOR, 25 KG IN PLASTIC CONTAINER/JERRY CAN, Qty=300 Kg. ♦ SYSTEM|OPEN CIRCUIT, DISPERSANT, 25 KG PLASTIC CONTAINER/JERRY CAN, Qty=100 Kg. ♦ OPEN CIRCUIT, MICROBIOCIDE FOR COOLING SYSTEMS, 25 KG PLASTIC CONTAINER/JERRY CAN, Qty=100 Kg. ♦ CLOSED CIRCUIT, NITRIDE, 30 KG PLASTIC CONTAINER/JERRY CAN, Qty=120 Kg. (As per specification) (Under Single Stage One Envelope Bidding Procedure) (The bidder is required to submit/upload the valid PEC Certificate mentioned in the Tender Document/Advertisement (where required) along with the bid on EPADS; otherwise, the bid will be liable for rejection. This tender is available on the EPADS link. Bidder(s) should participate in this tender through EPADS. The bidder should download the tender document through EPADS, fill out the BOQ/Bid form/Schedule of Requirement, upload all tender documents duly signed and stamped through EPADS; otherwise, the bid will be liable for rejection.” “The bidder must deposit/submit the physical bid bond to the Tender Room (SSGC HO) before the bid submission Time; otherwise, the bid will be liable for rejection)
Different Types of Printed Stationery (i.e. FILE COVER, T.A. FORM, VDRR FORM, S.S.G.C. LETTER HEAD, GATE PASS BOOK, TENDER DOCUMENTS FOLDER, BIN/STOCK CARD, ATTENDANCE REGISTER, VEHICLE LOG BOOK, IN / OUT GATE REGISTERS, PRICE COMPARISON TAG, TECHNICAL EVALUATION TAG, TENDER ENQUIRY TAG, PPRA WEB SITE TAG, BID TAG, SSGC WEB SITE TAG, ANNEXURE-"A", "B" & "C" TAG, REQUISITION TAG, PRESS CLIPPING TAG, PROPRIETARY APPROVAL TAG, "URGENT" TAG, PRE-QUALIFIED TAG, EQUIPMENT / VEHICLE BOOK FOR REPAIR & MAINTENANCE, ROAD MOVEMENT ORDER FORM & WHITE ENVELOPE), T/Item=31 & T/Qty=130,650. (Under Single Stage One Envelope Bidding Procedure). (The bidder is required to submit/upload the valid PEC Certificate mentioned in the Tender Document/Advertisement (where required) along with the bid on EPADS; otherwise, the bid will be liable for rejection. This tender is available on the EPADS link. Bidder(s) should participate in this tender through EPADS. The bidder should download the tender document through EPADS, fill out the BOQ/Bid form/Schedule of Requirement, upload all tender documents duly signed and stamped through EPADS; otherwise, the bid will be liable for rejection.” “The bidder must deposit/submit the physical bid bond to the Tender Room (SSGC HO) before the bid submission Time; otherwise, the bid will be liable for rejection)
Printing of Annual Report, Half Yearly Quarterly Accounts Report, Annual Report Proxy Book & Brown Envelope, T/Item=06 & T/Qty=64,540. (Under Single Stage Two Envelope Bidding Procedure). (The bidder is required to submit/upload the valid PEC Certificate mentioned in the Tender Document/Advertisement (where required) along with the bid on EPADS; otherwise, the bid will be liable for rejection. This tender is available on the EPADS link. Bidder(s) should participate in this tender through EPADS. The bidder should download the tender document through EPADS, fill out the BOQ/Bid form/Schedule of Requirement, upload all tender documents duly signed and stamped through EPADS; otherwise, the bid will be liable for rejection.” “The bidder must deposit/submit the physical bid bond to the Tender Room (SSGC HO) before the bid submission Time; otherwise, the bid will be liable for rejection)
♦ POLYTHENE BAGS SIZE 16-1/2" x 22-1/2" WEIGHT: 50 GRAMS, Qty=1200 Nos. ♦ BAGS POLYTHENE SIZE 24" x 36-1/2" WEIGHT: 100 GRAMS, Qty=24,000 Nos. ♦ BAGS POLYTHENE SIZE 30-1/2" x 51-1/2" WEIGHT: 150 GRAMS, Qty=7200. (Under Single Stage One Envelope Bidding Procedure). (The bidder is required to submit/upload the valid PEC Certificate mentioned in the Tender Document/Advertisement (where required) along with the bid on EPADS; otherwise, the bid will be liable for rejection. This tender is available on the EPADS link. Bidder(s) should participate in this tender through EPADS. The bidder should download the tender document through EPADS, fill out the BOQ/Bid form/Schedule of Requirement, upload all tender documents duly signed and stamped through EPADS; otherwise, the bid will be liable for rejection.” “The bidder must deposit/submit the physical bid bond to the Tender Room (SSGC HO) before the bid submission Time; otherwise, the bid will be liable for rejection)
Civil Electrical and Plumbing Works for Repair / Renovate (03) Nos. Rooms) of old Transit at HQ Shikarpur (As per BOQ) (Having Valid PEC in Category C-6 (Sub Category CE-10) or above) (Under Single Stage One Envelope Bidding Procedure) (On Complete Package Basis).
. The bidder is required to submit/upload the valid PEC Certificate mentioned in the Tender Document/Advertisement (where required) along with the bid on EPADS; otherwise, the bid will be liable for rejection. This tender is available on the EPADS link. Bidder(s) should participate in this tender through EPADS. The bidder should download the tender document through EPADS, fill out the BOQ/Bid form/Schedule of Requirement, upload all tender documents duly signed and stamped through EPADS; otherwise, the bid will be liable for rejection.” “The bidder must deposit/submit the physical bid bond to the Tender Room (SSGC HO) before the bid submission Time; otherwise, the bid will be liable for rejection.”
Caution Tape 150mm Wide x 500m Long Roll, Qty=3,000 Roll. (As per specification) (Under Single Stage One Envelope Bidding Procedure). (The bidder is required to submit/upload the valid PEC Certificate mentioned in the Tender Document/Advertisement (where required) along with the bid on EPADS; otherwise, the bid will be liable for rejection. This tender is available on the EPADS link. Bidder(s) should participate in this tender through EPADS. The bidder should download the tender document through EPADS, fill out the BOQ/Bid form/Schedule of Requirement, upload all tender documents duly signed and stamped through EPADS; otherwise, the bid will be liable for rejection.” “The bidder must deposit/submit the physical bid bond to the Tender Room (SSGC HO) before the bid submission Time; otherwise, the bid will be liable for rejection)
Tractor With Trolley Including Front Blade & Fiber Glass Sun Canopy, 80-85HP, Diesel Engine, Speed 1700-2200, 04 Cylinders, Water Cooled, Lifting Capacity: 2000 KG, Hydraulic Trolley, 8-10 Ton, Blade: 6' W x 2' H, Qty=01 No. (As per specification) (Under Single Stage One Envelope Bidding Procedure) (The bidder is required to submit/upload the valid PEC Certificate mentioned in the Tender Document/Advertisement (where required) along with the bid on EPADS; otherwise, the bid will be liable for rejection. This tender is available on the EPADS link. Bidder(s) should participate in this tender through EPADS. The bidder should download the tender document through EPADS, fill out the BOQ/Bid form/Schedule of Requirement, upload all tender documents duly signed and stamped through EPADS; otherwise, the bid will be liable for rejection.” “The bidder must deposit/submit the physical bid bond to the Tender Room (SSGC HO) before the bid submission Time; otherwise, the bid will be liable for rejection)
♦ Pipe and Cable Locator Portable Battery Operated, Oscillator: Solid State Construction, Power Output Max 15 Watts, Qty=02 Nos. ♦ AC/DC Clamp on Current Meter Digital, AC & DC Range 1A-400 AMP. Useable Current Range 0.5A -400A, Battery Operated, Hand Held, Light Weight Rugged Clamp, Qty=03 Nos. ♦ Infra-Red Digital Thermometer, Range 0-300 Deg. C, Response Time: Less Than 1 Sec., Large Dual LCD Display, Accuracy: 0.5%, Qty=04 Nos. ♦ Ultrasonic Thickness Gauge, Battery Life: 60 Hrs 10 Hrs, (Rechargeable), Indicator Required, 230V, 50 HZ, Steel Material, Qty=02 Nos. ♦ Coating Thickness Gauge Required for Dry & Wet Film, Standard Practice for Measurement for Notch Gauges, Qty=01 No. (As per specification) (Under Single Stage One Envelope Bidding Procedure) (The bidder is required to submit/upload the valid PEC Certificate mentioned in the Tender Document/Advertisement (where required) along with the bid on EPADS; otherwise, the bid will be liable for rejection. This tender is available on the EPADS link. Bidder(s) should participate in this tender through EPADS. The bidder should download the tender document through EPADS, fill out the BOQ/Bid form/Schedule of Requirement, upload all tender documents duly signed and stamped through EPADS; otherwise, the bid will be liable for rejection.” “The bidder must deposit/submit the physical bid bond to the Tender Room (SSGC HO) before the bid submission Time; otherwise, the bid will be liable for rejection.)
Motor Vehicles: (Only for Authorized 3S Dealers by invoking direct contracting PPRA Clause 42 (c) (vii) & 36(a) 2004) (Only for Local Manufacturer & Local authorized dealers) (Under Single Stage One Envelope Bidding Procedure).♦Pick-Up Double Cabin 4 x 4, Diesel, 2500 – 3200 CC, Fully Loaded Air Conditioned (Company Fitted), c/w. all standard accessories, Qty=04 Nos. ♦ Pick-Up Single Cabin 4 x 2, Diesel Engine, 2200-2500 CC, Latest Model c/w. standard accessories, Qty=07 Nos. (The bidder is required to submit/upload the valid PEC Certificate mentioned in the Tender Document/Advertisement (where required) along with the bid on EPADS; otherwise, the bid will be liable for rejection. This tender is available on the EPADS link. Bidder(s) should participate in this tender through EPADS. The bidder should download the tender document through EPADS, fill out the BOQ/Bid form/Schedule of Requirement, upload all tender documents duly signed and stamped through EPADS; otherwise, the bid will be liable for rejection.” “The bidder must deposit/submit the physical bid bond to the Tender Room (SSGC HO) before the bid submission Time; otherwise, the bid will be liable for rejection)
Room Heater (Gas), Double Plate Burner, 22 Gauge M.S. Sheet, Brown Met, Standard Size, Qty=06 Nos♦Machine PE Pipe Squeezing, Qty=01 No. ♦ Electro Fusion Machine Control Box, Qty=04 Nos. ♦ Tool Pipe Squeezing of 20 to 63mm Dia, Qty=01 No. ♦ Pipe Bending Machine Hydraulically Operated, 1/2"-2" Dia Pipe, Qty=01 No. ♦ Machine Pipe Squeezing A/W. Hydraulic Pump for Squeezing 3/4" - 1" Steel Pipe, Qty=02 Nos. ♦ Grease Gun Hydraulic, Hand Operated, Injecting Grease Sticks, Qty=01 Nos. ♦ Hand Grinder, Size 7", Suitable for Clean the Welding Beads of M.S Pipes, Low Noise, Air Cooling Design, Qty=03 Nos. ♦ Dewatering Pump, Centrifugal type, Heavy Duty, Mono Block 2 Support, 200 Gallon Per Minutes, Qty=02 Nos. ♦ Pavement Breaker/Road Breaker, Electric Driven, Handy & Electrically Operated, Weight 14 to 16 KG, Qty=01 No. ♦ Electronic Digital Pressure Gauge, 4" to 6" Dia. Pressure Range: 250 PSIG, Min. 5 Digit. LCD, Qty=02 Nos. (As per specification/Drawing) (For item # 2,3,7,8 & 10: Valid ISO 9001/9000 Certification required) (Under Single Stage One Envelope Bidding Procedure). (The bidder is required to submit/upload the valid PEC Certificate mentioned in the Tender Document/Advertisement (where required) along with the bid on EPADS; otherwise, the bid will be liable for rejection. This tender is available on the EPADS link. Bidder(s) should participate in this tender through EPADS. The bidder should download the tender document through EPADS, fill out the BOQ/Bid form/Schedule of Requirement, upload all tender documents duly signed and stamped through EPADS; otherwise, the bid will be liable for rejection.” “The bidder must deposit/submit the physical bid bond to the Tender Room (SSGC HO) before the bid submission Time; otherwise, the bid will be liable for rejection)
♦ Solar Module: 500W, 24-V-48V, 10A-20A, Efficiency:>_ 20%, Power Tolerance: +_3W, Cell Type: Monocrystalline PERC, Glass: 3.2MM (High Transmission, Low Iron, Anti-Reflective Coating, Heat Tempered, IP-68 Rated, Qty=60 Nos. ♦ Electrolyte Water, PH Range: 0.0 fo 14.0, 0.01 PH, General Type with Data Saving Function, Back Light, Accuracy: +, -0.01, Storage Capacity: 200 Results, Recharge Lithium Battery, Qty=02 Nos. ♦Tubular Back-Up Battery Bank, Each 24V Battery Cell must be Capable of providing 1200AH at a 10-Hour Discharge Rate & A Discharge Voltage no less than 1.8 V per Cell, As Nominal 24V & 2400 AH System at Section-IV, Qty=144 Set ♦ Solar Charge Controller (Compatible with Solar Panels & Battery Bank), Regulate the Charging of 12-24V Solar Battery System, Rating: 180 AMPS, Array Current at Nomina 24 Volts, Switches of 30A each, Load: 25A, Qty=10 Nos. ♦ Solid State Electronic D.C Switching Power Supply Unit, Rating: 20 to 32 Input Voltage, 40A (Min.) Input Current, 0-24 OP. Volt., 0-40 OP. Current, Constant Voltage Control, Qty=09 Nos. (As per specification) (Under Single Stage One Envelope Bidding Procedure). (The bidder is required to submit/upload the valid PEC Certificate mentioned in the Tender Document/Advertisement (where required) along with the bid on EPADS; otherwise, the bid will be liable for rejection. This tender is available on the EPADS link. Bidder(s) should participate in this tender through EPADS. The bidder should download the tender document through EPADS, fill out the BOQ/Bid form/Schedule of Requirement, upload all tender documents duly signed and stamped through EPADS; otherwise, the bid will be liable for rejection.” “The bidder must deposit/submit the physical bid bond to the Tender Room (SSGC HO) before the bid submission Time; otherwise, the bid will be liable for rejection)
Components for Gas Meters: (As per Drawing/Specification) (Only for Pre-Qualified Vendors) (By Invoking PPRA Clauses 42(d)(i) & (ii) "Negotiated Tendering" (Vendorized Items)) (Under Single Stage One Envelope Bidding Procedure) ♦ Meters Body, Un-Painted, Unpainted, Qty=59,000 Nos. ♦ Top Cover with Extruded Inlet & Outlet, Qty=59,000 Nos. ♦ Front Cover, Un-Painted, Qty=59,000 Nos. ♦ Rear Cover, Qty=59,000 Nos. (The bidder is required to submit/upload the valid PEC Certificate mentioned in the Tender Document/Advertisement (where required) along with the bid on EPADS; otherwise, the bid will be liable for rejection. This tender is available on the EPADS link. Bidder(s) should participate in this tender through EPADS. The bidder should download the tender document through EPADS, fill out the BOQ/Bid form/Schedule of Requirement, upload all tender documents duly signed and stamped through EPADS; otherwise, the bid will be liable for rejection.” “The bidder must deposit/submit the physical bid bond to the Tender Room (SSGC HO) before the bid submission Time; otherwise, the bid will be liable for rejection.)
Towing Hook for Pickup 4 x 2, For Towing of Heavy Machinery, Such as Weld Plant, Air Compressors, Heavy Duty Water Pumps etc, Qty=07 Nos. (As per drawing) (Under Single Stage One Envelope Bidding Procedure). (The bidder is required to submit/upload the valid PEC Certificate mentioned in the Tender Document/Advertisement (where required) along with the bid on EPADS; otherwise, the bid will be liable for rejection. This tender is available on the EPADS link. Bidder(s) should participate in this tender through EPADS. The bidder should download the tender document through EPADS, fill out the BOQ/Bid form/Schedule of Requirement, upload all tender documents duly signed and stamped through EPADS; otherwise, the bid will be liable for rejection.” “The bidder must deposit/submit the physical bid bond to the Tender Room (SSGC HO) before the bid submission Time; otherwise, the bid will be liable for rejection)
Different Types of Spares for Terex Crane & Hyundai Robex Excavator, T/Item=28 & T/Qty=367. (Under Single Stage One Envelope Bidding Procedure). (The bidder is required to submit/upload the valid PEC Certificate mentioned in the Tender Document/Advertisement (where required) along with the bid on EPADS; otherwise, the bid will be liable for rejection. This tender is available on the EPADS link. Bidder(s) should participate in this tender through EPADS. The bidder should download the tender document through EPADS, fill out the BOQ/Bid form/Schedule of Requirement, upload all tender documents duly signed and stamped through EPADS; otherwise, the bid will be liable for rejection.” “The bidder must deposit/submit the physical bid bond to the Tender Room (SSGC HO) before the bid submission Time; otherwise, the bid will be liable for rejection)
Different Types of Stainless Steel Tubes (i.e. Tube Seamless, Ball Valve, Ferrol Connector, Bushing, Elbow, Union, Bar Brass Hexagonal, Reducing-Union, Tee Fitting, Port Connector Tube-End Reducers, Nut-Ferrule Packing SS, Short-Nipple, Tube – Cutter, SS Union, Tube Cutter, 2-Slot Tube Bender, Electrolytic SS Union with Double Ferrule, Socket Bush SS, Tee Fitting Union & Handle Operated SS Ball Valve) T/Item=33 & T/Qty=6,067. (As per specification) (Supplier/local agent is requested to submit the Authority Letter of the Manufacturer) (Under Single Stage One Envelope Bidding Procedure). (The bidder is required to submit/upload the valid PEC Certificate mentioned in the Tender Document/Advertisement (where required) along with the bid on EPADS; otherwise, the bid will be liable for rejection. This tender is available on the EPADS link. Bidder(s) should participate in this tender through EPADS. The bidder should download the tender document through EPADS, fill out the BOQ/Bid form/Schedule of Requirement, upload all tender documents duly signed and stamped through EPADS; otherwise, the bid will be liable for rejection.” “The bidder must deposit/submit the physical bid bond to the Tender Room (SSGC HO) before the bid submission Time; otherwise, the bid will be liable for rejection)
Electrostatic Paint & Thinner: ♦ Paint Powder Coating (SSGC RAL 5009 Azure Blue) with pure Polyester Base, Qty=7,500 Kg. (As per specification) (Under Single Stage One Envelope Bidding Procedure). (The bidder is required to submit/upload the valid PEC Certificate mentioned in the Tender Document/Advertisement (where required) along with the bid on EPADS; otherwise, the bid will be liable for rejection. This tender is available on the EPADS link. Bidder(s) should participate in this tender through EPADS. The bidder should download the tender document through EPADS, fill out the BOQ/Bid form/Schedule of Requirement, upload all tender documents duly signed and stamped through EPADS; otherwise, the bid will be liable for rejection.” “The bidder must deposit/submit the physical bid bond to the Tender Room (SSGC HO) before the bid submission Time; otherwise, the bid will be liable for rejection)
Pipe Fittings - Galvanized Iron: (As per specification) (Under Single Stage One Envelope Bidding Procedure) ♦ Elbow G.I 1/2", Qty=30,000 Nos. (The bidder is required to submit/upload the valid PEC Certificate mentioned in the Tender Document/Advertisement (where required) along with the bid on EPADS; otherwise, the bid will be liable for rejection. This tender is available on the EPADS link. Bidder(s) should participate in this tender through EPADS. The bidder should download the tender document through EPADS, fill out the BOQ/Bid form/Schedule of Requirement, upload all tender documents duly signed and stamped through EPADS; otherwise, the bid will be liable for rejection.” “The bidder must deposit/submit the physical bid bond to the Tender Room (SSGC HO) before the bid submission Time; otherwise, the bid will be liable for rejection)
Paper Off-Set 80 Grams 8.25" x 11.69" (A-4) (210mm x 297mm) (One Ream of 500 Sheets) , Qty=18,000 Ream, (As per specification) (Local Authorized distributor / sub distributor / agent / sub agent with valid certificate) (Under Single Stage One Envelope Bidding Procedure). (The bidder is required to submit/upload the valid PEC Certificate mentioned in the Tender Document/Advertisement (where required) along with the bid on EPADS; otherwise, the bid will be liable for rejection. This tender is available on the EPADS link. Bidder(s) should participate in this tender through EPADS. The bidder should download the tender document through EPADS, fill out the BOQ/Bid form/Schedule of Requirement, upload all tender documents duly signed and stamped through EPADS; otherwise, the bid will be liable for rejection.” “The bidder must deposit/submit the physical bid bond to the Tender Room (SSGC HO) before the bid submission Time; otherwise, the bid will be liable for rejection)
Fabrication of Non-Return Valve: ♦ Non-Return Valve for RW750 Meters, Qty=1,000 Nos. ♦ Non-Return Valve for MR-9 Meters, Qty=1,000 Nos. ♦ Non-Return Valve for MR-12 Meters, Qty=1,000 Nos. ♦ Spares for AL-800 Meter: Non-Return Valve P.NO MRSNRVAL800D, Qty=1,000 Nos. (As per drawing) (Under Single Stage One Envelope Bidding Procedure). (The bidder is required to submit/upload the valid PEC Certificate mentioned in the Tender Document/Advertisement (where required) along with the bid on EPADS; otherwise, the bid will be liable for rejection. This tender is available on the EPADS link. Bidder(s) should participate in this tender through EPADS. The bidder should download the tender document through EPADS, fill out the BOQ/Bid form/Schedule of Requirement, upload all tender documents duly signed and stamped through EPADS; otherwise, the bid will be liable for rejection.” “The bidder must deposit/submit the physical bid bond to the Tender Room (SSGC HO) before the bid submission Time; otherwise, the bid will be liable for rejection)
Rental Premises for Sub Zonal Office Miro Khan of Larkana Region, Having Atleast 02 to 03 Rooms Additional Room/Storage Space Would be Added Advantage Admeasuring Total Area of 2000 to 4500 Sq.Ft, Sufficient Parking Area (Interested Parties having legally cleared with valid title/ownership documents of premises are Eligible to Participate) (Under Single Stage One Envelope Bidding Procedure).
(The bidder is required to submit/upload the valid PEC Certificate mentioned in the Tender Document/Advertisement (where required) along with the bid on EPADS; otherwise, the bid will be liable for rejection. This tender is available on the EPADS link. Bidder(s) should participate in this tender through EPADS. The bidder should download the tender document through EPADS, fill out the BOQ/Bid form/Schedule of Requirement, upload all tender documents duly signed and stamped through EPADS; otherwise, the bid will be liable for rejection.” “The bidder must deposit/submit the physical bid bond to the Tender Room (SSGC HO) before the bid submission Time; otherwise, the bid will be liable for rejection)
Workshop Tools: (As per specification) (Note for Item # 1 ISO-9000 Certificate of the manufacturer) (Under Single Stage One Envelope Bidding Procedure) ♦ Grease Gun Hydraulic Machine Heavy Duty High Pressure, Qty=02 Nos. ♦Water Pump Centrifugal with Explosion Proof Motor, 2hp, Three Phase, Qty=01 No. ♦ Vibration Pen, Low Frequency Range (Overall Measurement), 10 Hz to 1,000 Hz, Qty=02 Nos. ♦ Tool Trolley 500 Pieces, 7 Drawers, 3/4" Drive Box Socket, Qty=01 Set. ♦ Impact Tool Driver, 20v, Max Impact, High Torque with Battery and Charger, Qty=03 Set. (The bidder is required to submit/upload the valid PEC Certificate mentioned in the Tender Document/Advertisement (where required) along with the bid on EPADS; otherwise, the bid will be liable for rejection. This tender is available on the EPADS link. Bidder(s) should participate in this tender through EPADS. The bidder should download the tender document through EPADS, fill out the BOQ/Bid form/Schedule of Requirement, upload all tender documents duly signed and stamped through EPADS; otherwise, the bid will be liable for rejection.” “The bidder must deposit/submit the physical bid bond to the Tender Room (SSGC HO) before the bid submission Time; otherwise, the bid will be liable for rejection)
Spares for Solar Taurus T-60 Gas Turbine Compressors: ♦ Major Class Repair Kit Part No 66403D0200, Qty=01 No. (Under Single Stage One Envelope Bidding Procedure)
(The bidder is required to submit/upload the valid PEC Certificate mentioned in the Tender Document/Advertisement (where required) along with the bid on EPADS; otherwise, the bid will be liable for rejection. This tender is available on the EPADS link. Bidder(s) should participate in this tender through EPADS. The bidder should download the tender document through EPADS, fill out the BOQ/Bid form/Schedule of Requirement, upload all tender documents duly signed and stamped through EPADS; otherwise, the bid will be liable for rejection.” “The bidder must deposit/submit the physical bid bond to the Tender Room (SSGC HO) before the bid submission Time; otherwise, the bid will be liable for rejection.)
Providing Postpaid Voice Connection For Mobile Cell Phone Services with Sim, 3G/4G Technology & P1, P2 & P3 Minutes and with two Separate Data Pools with Static IP'S (As Per Criteria/BOQ) (Under Quality & Cost Based Selection Method) (Under Single Stage Two Envelope Bidding Procedure) (On Complete Package Basis)
The bidder is required to submit/upload the valid PEC Certificate mentioned in the Tender Document/Advertisement (where required) along with the bid on EPADS; otherwise, the bid will be liable for rejection. This tender is available on the EPADS link. Bidder(s) should participate in this tender through EPADS. The bidder should download the tender document through EPADS, fill out the BOQ/Bid form/Schedule of Requirement, upload all tender documents duly signed and stamped through EPADS; otherwise, the bid will be liable for rejection.” “The bidder must deposit/submit the physical bid bond to the Tender Room (SSGC HO) before the bid submission Time; otherwise, the bid will be liable for rejection.”
Rental Premises for Sub Zonal Office Baldia Zone, Admeasuing Total Area of 2500 to 3000 Sq.Ft. Premises Must Have Sufficient Parking Area For Vehicles, Should be Located In The Main Area of Baldia (As per BOQ) (Interested Parties having legally cleared with valid title/ownership documents of premises are Eligible to Participate) (Under Single Stage One Envelope Bidding Procedure).
The bidder is required to submit/upload the valid PEC Certificate mentioned in the Tender Document/Advertisement (where required) along with the bid on EPADS; otherwise, the bid will be liable for rejection. This tender is available on the EPADS link. Bidder(s) should participate in this tender through EPADS. The bidder should download the tender document through EPADS, fill out the BOQ/Bid form/Schedule of Requirement, upload all tender documents duly signed and stamped through EPADS; otherwise, the bid will be liable for rejection.” “The bidder must deposit/submit the physical bid bond to the Tender Room (SSGC HO) before the bid submission Time; otherwise, the bid will be liable for rejection.”
Providing Services for The Fabrication of Index Assembly for G-1.6 Gas Meter, Complete Work Is Required for Labor and Overhead. Complete Material/Components, Including Dial Will be Provided by MMP (As per BOQ/TOR) (Under Single Stage One Envelope Bidding Procedure) (On Complete Package Basis).
The bidder is required to submit/upload the valid PEC Certificate mentioned in the Tender Document/Advertisement (where required) along with the bid on EPADS; otherwise, the bid will be liable for rejection. This tender is available on the EPADS link. Bidder(s) should participate in this tender through EPADS. The bidder should download the tender document through EPADS, fill out the BOQ/Bid form/Schedule of Requirement, upload all tender documents duly signed and stamped through EPADS; otherwise, the bid will be liable for rejection.” “The bidder must deposit/submit the physical bid bond to the Tender Room (SSGC HO) before the bid submission Time; otherwise, the bid will be liable for rejection.”
Construction of New CC Platform with Chain Link Fencing for TBS/PRS Assemblies (13 Nos) at Arround 05 Km Radius at Mazari Gas Field Badin (As per BOQ) (Having Valid PEC in Category C-6 Sub Category, CE-10, BC-01 or above) (Under Single Stage One Envelope Bidding Procedure) (On Complete Package Basis).
The bidder is required to submit/upload the valid PEC Certificate mentioned in the Tender Document/Advertisement (where required) along with the bid on EPADS; otherwise, the bid will be liable for rejection. This tender is available on the EPADS link. Bidder(s) should participate in this tender through EPADS. The bidder should download the tender document through EPADS, fill out the BOQ/Bid form/Schedule of Requirement, upload all tender documents duly signed and stamped through EPADS; otherwise, the bid will be liable for rejection.” “The bidder must deposit/submit the physical bid bond to the Tender Room (SSGC HO) before the bid submission Time; otherwise, the bid will be liable for rejection.”
Engaging Training Service Provider for SSGC Executives of Multiple Grades (As per Criteria/BOQ/T&C) (Under Single Stage Two Envelope Bidding Procedure) (On Complete Package Basis).
The bidder is required to submit/upload the valid PEC Certificate mentioned in the Tender Document/Advertisement (where required) along with the bid on EPADS; otherwise, the bid will be liable for rejection. This tender is available on the EPADS link. Bidder(s) should participate in this tender through EPADS. The bidder should download the tender document through EPADS, fill out the BOQ/Bid form/Schedule of Requirement, upload all tender documents duly signed and stamped through EPADS; otherwise, the bid will be liable for rejection.” “The bidder must deposit/submit the physical bid bond to the Tender Room (SSGC HO) before the bid submission Time; otherwise, the bid will be liable for rejection.”
Refurbishment of Deep Well Groundbed (07-Nos) at Distribution North Lower Sindh Hyderabad Region (As per BOQ) (Having Valid PEC in Category C-6 or above) (Under Single Stage One Envelope Bidding Procedure) (On Lot wise Package Basis).
The bidder is required to submit/upload the valid PEC Certificate mentioned in the Tender Document/Advertisement (where required) along with the bid on EPADS; otherwise, the bid will be liable for rejection. This tender is available on the EPADS link. Bidder(s) should participate in this tender through EPADS. The bidder should download the tender document through EPADS, fill out the BOQ/Bid form/Schedule of Requirement, upload all tender documents duly signed and stamped through EPADS; otherwise, the bid will be liable for rejection.” “The bidder must deposit/submit the physical bid bond to the Tender Room (SSGC HO) before the bid submission Time; otherwise, the bid will be liable for rejection.”
Coating Repair Works on Under Ground Pipeline at CC Distribution North Upper Sindh Larkana on 6" Dia. Supply main F.Y 2025-26 From TBS Shahdadkot to Upstream (As per Criteria/BOQ/T&C) ( Having Valid PEC in Category C-6 or Above) (Under Single Stage Two Envelope Bidding Procedure) ( On Complete Package Basis).
The bidder is required to submit/upload the valid PEC Certificate mentioned in the Tender Document/Advertisement (where required) along with the bid on EPADS; otherwise, the bid will be liable for rejection. This tender is available on the EPADS link. Bidder(s) should participate in this tender through EPADS. The bidder should download the tender document through EPADS, fill out the BOQ/Bid form/Schedule of Requirement, upload all tender documents duly signed and stamped through EPADS; otherwise, the bid will be liable for rejection.” “The bidder must deposit/submit the physical bid bond to the Tender Room (SSGC HO) before the bid submission Time; otherwise, the bid will be liable for rejection.”
Dewatering Pump with Diesel Engine, Flow: 60-70 GMP, Head: 180- 200 Feet, BHP:6-10, Suction 3 Inch, Discharging 2-1/2 Inch, Fuel Tank Enclosed, Wheel Mounted Canopy, Qty=01 No. (As per specification) (Under Single Stage One Envelope Bidding Procedure).
(The bidder is required to submit/upload the valid PEC Certificate mentioned in the Tender Document/Advertisement (where required) along with the bid on EPADS; otherwise, the bid will be liable for rejection. This tender is available on the EPADS link. Bidder(s) should participate in this tender through EPADS. The bidder should download the tender document through EPADS, fill out the BOQ/Bid form/Schedule of Requirement, upload all tender documents duly signed and stamped through EPADS; otherwise, the bid will be liable for rejection.” “The bidder must deposit/submit the physical bid bond to the Tender Room (SSGC HO) before the bid submission Time; otherwise, the bid will be liable for rejection).
Annual Maintenance Contract AMC for SSGC PABX Exchanges (As per BOQ) (Under Single Stage One Envelope Bidding Procedure) (On Complete Package Basis).
The bidder is required to submit/upload the valid PEC Certificate mentioned in the Tender Document/Advertisement (where required) along with the bid on EPADS; otherwise, the bid will be liable for rejection. This tender is available on the EPADS link. Bidder(s) should participate in this tender through EPADS. The bidder should download the tender document through EPADS, fill out the BOQ/Bid form/Schedule of Requirement, upload all tender documents duly signed and stamped through EPADS; otherwise, the bid will be liable for rejection.” “The bidder must deposit/submit the physical bid bond to the Tender Room (SSGC HO) before the bid submission Time; otherwise, the bid will be liable for rejection.”
Supply, Installation, Testing & Commissioning of (70-75 KVA) Gas Engine Generator with Sound Proof Canopy, Qty=1 No. (As per Specification) (On Complete Package basis & On Turnkey Basis) (On FOB/C&F/FOR Basis) (Under Single Stage Two Envelope Bidding Procedure) (Bidder Should be of OEM of Engine�s authorized dealer/Sole agent) (OEM should have Certification for quality management system ISO 9001 or ISO 45001 and Health & Safety management System ISO 18001 / ISO 45001) (Bidder should provide Valid PEC License with relevant field of Specialization Code-EE04/05/ ME-03).
Pressure Regulator Test Bench (Software Operated) & its FAT, Qty=1 No. (As per Specification) (On Complete Package Basis) (Under Single Stage Two Envelope Bidding Procedure) FOB/C&F/FOR(Only for Local Manufacturers as per SRO 827(1)/2001)
Battery Chargers: ♦24 VDC Battery Charger, 180-270 VAC, 45-66 HZ, Power Factor: >0.99, 24-26.7 VDC, Current :> _100 AMPS, Efficiency: >_93%, Low Mains Shutdown, High Temperature, Temps: 0 Deg.C to +55 Deg.C, Qty=02 Nos. ♦ 48VDC Battery Charger, 180-270 VAC, 45-66 HZ, Rear Connection, Current: >_100 AMPS, Battery Breaker: >_ 2 x Positions, Rating: 100 AMPS, Load MCBS :> 6 x Positons, Input: >_ 2 Digital, Output: >_ 4 Alarm Relay, Qty=02 Nos. (As per specification) (Under Single Stage One Envelope Bidding Procedure). (The bidder is required to submit/upload the valid PEC Certificate mentioned in the Tender Document/Advertisement (where required) along with the bid on EPADS; otherwise, the bid will be liable for rejection. This tender is available on the EPADS link. Bidder(s) should participate in this tender through EPADS. The bidder should download the tender document through EPADS, fill out the BOQ/Bid form/Schedule of Requirement, upload all tender documents duly signed and stamped through EPADS; otherwise, the bid will be liable for rejection.” “The bidder must deposit/submit the physical bid bond to the Tender Room (SSGC HO) before the bid submission Time; otherwise, the bid will be liable for rejection)
Maintenance & Service Contract Access Control System For Data Center, Head office And Hyderabad With Lock (as per BOQ)(Bidder must provide local Authorized Distributor/Dealer Reseller Certificate)(Under Single Stage One Envelope Bidding Procedure)(On Complete Package Basis).
The bidder is required to submit/upload the valid PEC Certificate mentioned in the Tender Document/Advertisement (where required) along with the bid on EPADS; otherwise, the bid will be liable for rejection. This tender is available on the EPADS link. Bidder(s) should participate in this tender through EPADS. The bidder should download the tender document through EPADS, fill out the BOQ/Bid form/Schedule of Requirement, upload all tender documents duly signed and stamped through EPADS; otherwise, the bid will be liable for rejection.” “The bidder must deposit/submit the physical bid bond to the Tender Room (SSGC HO) before the bid submission Time; otherwise, the bid will be liable for rejection.”
MOTORCYCLE '125CC', LATEST MODEL WITH ACCESSORIES, Qty=07 Nos. (Only for Local Manufacturers / Local Authorized Dealers) (Under Single Stage One Envelope Bidding Procedure) “The bidder is required to submit/upload the valid PEC Certificate mentioned in the Tender Document/Advertisement (where required) along with the bid on EPADS; otherwise, the bid will be liable for rejection. This tender is available on the EPADS link. Bidder(s) should participate in this tender through EPADS. The bidder should download the tender document through EPADS, fill out the BOQ/Bid form/Schedule of Requirement, upload all tender documents duly signed and stamped through EPADS; otherwise, the bid will be liable for rejection.” “The bidder must deposit/submit the physical bid bond to the Tender Room (SSGC HO) before the bid submission Time; otherwise, the bid will be liable for rejection.”
Registration of Chemist Discount on all Patent Medicines Registered In Red Book Latest Edition for Medical Centre Quetta (As per Criteria/TOR/BOQ) (Under Single Stage Two Envelope Bidding Procedure)
(The bidder is required to submit/upload the valid PEC Certificate mentioned in the Tender Document/Advertisement (where required) along with the bid on EPADS; otherwise, the bid will be liable for rejection. This tender is available on the EPADS link. Bidder(s) should participate in this tender through EPADS. The bidder should download the tender document through EPADS, fill out the BOQ/Bid form/Schedule of Requirement, upload all tender documents duly signed and stamped through EPADS; otherwise, the bid will be liable for rejection.” “The bidder must deposit/submit the physical bid bond to the Tender Room (SSGC HO) before the bid submission Time; otherwise, the bid will be liable for rejection)
Rental Premises for Sub Zonal Office Naudero, Larkana Region Having at Least 2 to 4 Rooms Additional Room/Storage Space Would be Added Advantage Admeasuring Total Area of 1,800 to 4,500 Sq.Ft., Premises Must Have Sufficient Parking (Interested Parties having legally cleared with valid title/ownership documents of premises are Eligible to Participate) (Under Single Stage One Envelope Bidding Procedure).
(The bidder is required to submit/upload the valid PEC Certificate mentioned in the Tender Document/Advertisement (where required) along with the bid on EPADS; otherwise, the bid will be liable for rejection. This tender is available on the EPADS link. Bidder(s) should participate in this tender through EPADS. The bidder should download the tender document through EPADS, fill out the BOQ/Bid form/Schedule of Requirement, upload all tender documents duly signed and stamped through EPADS; otherwise, the bid will be liable for rejection.” “The bidder must deposit/submit the physical bid bond to the Tender Room (SSGC HO) before the bid submission Time; otherwise, the bid will be liable for rejection)
Rental Premises for Sub Zonal Office Orangi Extension, Karachi Region. Admeasuring Total Area of 2500 to 3000 Sq.Ft, The Premises Must Have Sufficient Parking Area for Vehicles, The Premises Should be Located In The Main area of Orangi (Interested Parties having legally cleared with valid title/ownership documents of premises are Eligible to Participate) (Under Single Stage One Envelope Bidding Procedure).
(The bidder is required to submit/upload the valid PEC Certificate mentioned in the Tender Document/Advertisement (where required) along with the bid on EPADS; otherwise, the bid will be liable for rejection. This tender is available on the EPADS link. Bidder(s) should participate in this tender through EPADS. The bidder should download the tender document through EPADS, fill out the BOQ/Bid form/Schedule of Requirement, upload all tender documents duly signed and stamped through EPADS; otherwise, the bid will be liable for rejection.” “The bidder must deposit/submit the physical bid bond to the Tender Room (SSGC HO) before the bid submission Time; otherwise, the bid will be liable for rejection)
Registration of Chemist for Discount on all Patent Medicines Registered In Red Book Latest Edition for Rawalpindi (as per BOQ/ Criteria)(Under Single Stage Two Envelope Bidding Procedure) (On Complete Package Basis)
(The bidder is required to submit/upload the valid PEC Certificate mentioned in the Tender Document/Advertisement (where required) along with the bid on EPADS; otherwise, the bid will be liable for rejection. This tender is available on the EPADS link. Bidder(s) should participate in this tender through EPADS. The bidder should download the tender document through EPADS, fill out the BOQ/Bid form/Schedule of Requirement, upload all tender documents duly signed and stamped through EPADS; otherwise, the bid will be liable for rejection.” “The bidder must deposit/submit the physical bid bond to the Tender Room (SSGC HO) before the bid submission Time; otherwise, the bid will be liable for rejection)
SPARES FOR COMMERCIAL METERS: ♦ TOP COVER GASKET FOR COMMERCIAL METERS P.NO 00ROW07050001, Qty=1,000 Nos. ♦ TOP COVER GASKET FOR COMMERCIAL METERS P.NO 00MOR090002, Qty=1,000 Nos. (Under Single Stage One Envelope Bidding Procedure)
The bidder is required to submit/upload the valid PEC Certificate mentioned in the Tender Document/Advertisement (where required) along with the bid on EPADS; otherwise, the bid will be liable for rejection. This tender is available on the EPADS link. Bidder(s) should participate in this tender through EPADS. The bidder should download the tender document through EPADS, fill out the BOQ/Bid form/Schedule of Requirement, upload all tender documents duly signed and stamped through EPADS; otherwise, the bid will be liable for rejection.” “The bidder must deposit/submit the physical bid bond to the Tender Room (SSGC HO) before the bid submission Time; otherwise, the bid will be liable for rejection.
♦ CRUSH SIZE 3/4", Qty=13000 Cubic Feet. (Under Single Stage One Envelope Bidding Procedure). The bidder is required to submit/upload the valid PEC Certificate mentioned in the Tender Document/Advertisement (where required) along with the bid on EPADS; otherwise, the bid will be liable for rejection. This tender is available on the EPADS link. Bidder(s) should participate in this tender through EPADS. The bidder should download the tender document through EPADS, fill out the BOQ/Bid form/Schedule of Requirement, upload all tender documents duly signed and stamped through EPADS; otherwise, the bid will be liable for rejection.” “The bidder must deposit/submit the physical bid bond to the Tender Room (SSGC HO) before the bid submission Time; otherwise, the bid will be liable for rejection.
♦ GRINDER ANGLE SIZE 180mm ( 7"), 220 VAC, 50-60 HZ. A/W ACCESSORIES, Qty=03 Nos. ♦ SUPPLY OF A MOBILE WORK SHOP TOOLS CABINET WITH 7 DRAWERS APPROX. 675 MM (W) x 450 MM (D) x 810 MM (H), COLD-ROLLED STEEL, MIN 0.8 MM THICKNES, POWDER-COATED PAINT (ANTI-COROSION & SCRATCH RESISTANT), 07 DRAWERS, MIN. LOAD 150-200 KG, Qty=02 Nos. ♦ HEAVY - DUTY ELECTRIC PRESSURE WASHER DESIGNED FOR BOTH DOMESTIC & LIGHT COMMERCIAL CLEANING APPLICATIONS, COPPER-WOUND INDUCTION MOTOR, POWER RATING: MIN 1800 W, 220-240 VAC, 50/60 HZ, NOT LESS THAN 140 BAR, 100-140 BAR, Qty=02 Nos. (As per specification) (Under Single Stage One Envelope Bidding Procedure). The bidder is required to submit/upload the valid PEC Certificate mentioned in the Tender Document/Advertisement (where required) along with the bid on EPADS; otherwise, the bid will be liable for rejection. This tender is available on the EPADS link. Bidder(s) should participate in this tender through EPADS. The bidder should download the tender document through EPADS, fill out the BOQ/Bid form/Schedule of Requirement, upload all tender documents duly signed and stamped through EPADS; otherwise, the bid will be liable for rejection.” “The bidder must deposit/submit the physical bid bond to the Tender Room (SSGC HO) before the bid submission Time; otherwise, the bid will be liable for rejection.
BLOWER, HAND-HELD, 110-120 MILES PER HOUR AIR SPEED FOR EFFECTIVE SWEEPING OF HARD SURFACES, 18V, 12 AMP BATTERY, HIGH PERFORMANCE MOTOR, NiMH BATTER PACKS FOR LONG RUN TIME, Qty=01 No. (As per specification) (Under Single Stage One Envelope Bidding Procedure). The bidder is required to submit/upload the valid PEC Certificate mentioned in the Tender Document/Advertisement (where required) along with the bid on EPADS; otherwise, the bid will be liable for rejection. This tender is available on the EPADS link. Bidder(s) should participate in this tender through EPADS. The bidder should download the tender document through EPADS, fill out the BOQ/Bid form/Schedule of Requirement, upload all tender documents duly signed and stamped through EPADS; otherwise, the bid will be liable for rejection.” “The bidder must deposit/submit the physical bid bond to the Tender Room (SSGC HO) before the bid submission Time; otherwise, the bid will be liable for rejection.
Design, Supply, Installation & Commissioning of Electric Motor Driven Pump along with its Controller for Fire Fighting System & its Ancillary Items. Qty=1 No. (As per Specification) (On FOB/C&F/FOR Basis) (On Complete Package Basis) (Under Single Stage Two Envelope Bidding Procedure).
Pressure Control Valves with Actuator, ANSI Class 600, Sizes: 1” & 6”, T/Item=2 & T/Qty=14 Nos. (As per Specification) (Under Single Stage Two Envelope Bidding Procedure) FOB/C&F/FOR(Only for Local Manufacturers as per SRO 827(1)/2001)
Flange Spreader, Size: 2” to 24”, Flange Sizes Class 150 to 900 (RF & RTJ Type), Spreading Force upto 3” Spread (Gap) required between Two Flanges, Manually Operated, Hardened Wedge for Safe Splitting, Qty=1 No. (As per Specification) (Under Single Stage One Envelope Bidding Procedure) FOB/C&F/FOR(Only for Local Manufacturers as per SRO 827(1)/2001)
Diesel Engine with Centrifugal Fire Pump, Flow 500 IGPM, Head 90-100 Psi, 200-220 Feet, BHP 35-40, Water Cooled Diesel Engine, HP: support to Pump, Enclosed Fuel Tank, Qty=3 Nos. (As per Specification) (Under Single Stage Two Envelope Bidding Procedure) FOB/C&F/FOR(Only for Local Manufacturers as per SRO 827(1)/2001)
Gas Leak Detector with Flexible Gooseneck Tube, Handheld & Portable, Measurement and Resolution: 0-20000 PPM – Resolution: 50 PPM, Response Time 10s or Less, Qty=4 Nos. (As per Specification) (Under Single Stage One Envelope Bidding Procedure) FOB/C&F/FOR(Only for Local Manufacturers as per SRO 827(1)/2001)
HART Calibrator, Part No. TREXLFPKLWS3S, Microprocessor: 800 Hz ARM CortexA8/NXP, Internal Memory Flash: 2 GB NAND and 32 GB Extended Flash, Display 5.7 Inch, Color VGA Resistive Touch Screen, Qty=1 No. (As per Specification) (Under Single Stage Two Envelope Bidding Procedure) FOB/C&F/FOR(Only for Local Manufacturers as per SRO 827(1)/2001)
Ditching / Backfilling Works Along with Allied Activities /Excavation of Trenches for Laying of 63mm, 125mm P.E Gas Pipeline Soft Padding & Soft Cushioning for SOG to, Cadet College Ghotki Through Bulk Meter on RLNG (Total 1880 Meters) (As Per Criteria/TOR/BOQ)(Having Valid PEC Certificate Category C-6 or Above Having specialization of CE-08 Category) (Under Single Stage Two Envelope Bidding Procedure) (On Complete Package Basis).
The bidder is required to submit/upload the valid PEC Certificate mentioned in the Tender Document/Advertisement (where required) along with the bid on EPADS; otherwise, the bid will be liable for rejection. This tender is available on the EPADS link. Bidder(s) should participate in this tender through EPADS. The bidder should download the tender document through EPADS, fill out the BOQ/Bid form/Schedule of Requirement, upload all tender documents duly signed and stamped through EPADS; otherwise, the bid will be liable for rejection.” “The bidder must deposit/submit the physical bid bond to the Tender Room (SSGC HO) before the bid submission Time; otherwise, the bid will be liable for rejection.”
Gas/Petrol Engine Generator: (As per specification) (Bidder Should be of OEM/OEM’S authorized distributor/Dealer, Sole agent/Sub authorized dealer for offered brand) (Manufacturer should have ISO-9001 Certified) (Under Single Stage One Envelope Bidding Procedure) ♦ Generator 5 - 6 KVA, Single Phase, 230VAC, 50HZ, Qty = 16 Nos.
“The bidder is required to submit/upload the valid PEC Certificate mentioned in the Tender Document/Advertisement (where required) along with the bid on EPADS; otherwise, the bid will be liable for rejection. This tender is available on the EPADS link. Bidder(s) should participate in this tender through EPADS. The bidder should download the tender document through EPADS, fill out the BOQ/Bid form/Schedule of Requirement, upload all tender documents duly signed and stamped through EPADS; otherwise, the bid will be liable for rejection.” “The bidder must deposit/submit the physical bid bond to the Tender Room (SSGC HO) before the bid submission Time; otherwise, the bid will be liable for rejection.”
Meter Lock Cock, Cast Iron 1/2", Qty=70,000 Nos. (As per specification/Drawing) (By Invoking PPRA Clauses 42(d)(i) & (ii) "Negotiated Tendering" (Vendorized Items)) (Under Single Stage One Envelope Bidding Procedure).
Service Tee 3/4", Qty=30,000 Nos. (As per specification) (By Invoking PPRA Clauses 42(d)(i) & (ii) "Negotiated Tendering" (Vendorized Items)) (Under Single Stage One Envelope Bidding Procedure).
1/2" Self Operated Domestic (Small) Gas Regulator (Tamper Proof), Set Point 8" Water Column, Capacity: Low, Qty=70,000 Nos. (As per specification) (Only for Pre-Qualified Vendors) (By Invoking PPRA Clauses 42(d)(i) & (ii) "Negotiated Tendering" (Vendorized Items)) (Under Single Stage One Envelope Bidding Procedure).
Clamp Pipe (Hook) for 1/2" NB Pipe, Qty=70,000 Nos. (As per specification) (Under Single Stage One Envelope Bidding Procedure) (The bidder is required to submit/upload the valid PEC Certificate mentioned in the Tender Document/Advertisement (where required) along with the bid on EPADS; otherwise, the bid will be liable for rejection. This tender is available on the EPADS link. Bidder(s) should participate in this tender through EPADS. The bidder should download the tender document through EPADS, fill out the BOQ/Bid form/Schedule of Requirement, upload all tender documents duly signed and stamped through EPADS; otherwise, the bid will be liable for rejection.” “The bidder must deposit/submit the physical bid bond to the Tender Room (SSGC HO) before the bid submission Time; otherwise, the bid will be liable for rejection)
Polyethylene (PE100) Transition Fittings 3/4" x 20 mm, Qty=40,000 Nos. (As per specification) (Valid ISO-9001 Certificate is mandatory) (Under Single Stage One Envelope Bidding Procedure) (The bidder is required to submit/upload the valid PEC Certificate mentioned in the Tender Document/Advertisement (where required) along with the bid on EPADS; otherwise, the bid will be liable for rejection. This tender is available on the EPADS link. Bidder(s) should participate in this tender through EPADS. The bidder should download the tender document through EPADS, fill out the BOQ/Bid form/Schedule of Requirement, upload all tender documents duly signed and stamped through EPADS; otherwise, the bid will be liable for rejection.” “The bidder must deposit/submit the physical bid bond to the Tender Room (SSGC HO) before the bid submission Time; otherwise, the bid will be liable for rejection)
Galvanised Iron Pipes: (As per specification) (Under Single Stage Two Envelope Bidding Procedure) ♦ Pipe GI 1/2" NB x 0.104" WT. Ends Threaded to BS-21, Qty=215,000 Metre. (The bidder is required to submit/upload the valid PEC Certificate mentioned in the Tender Document/Advertisement (where required) along with the bid on EPADS; otherwise, the bid will be liable for rejection. This tender is available on the EPADS link. Bidder(s) should participate in this tender through EPADS. The bidder should download the tender document through EPADS, fill out the BOQ/Bid form/Schedule of Requirement, upload all tender documents duly signed and stamped through EPADS; otherwise, the bid will be liable for rejection.” “The bidder must deposit/submit the physical bid bond to the Tender Room (SSGC HO) before the bid submission Time; otherwise, the bid will be liable for rejection.)
Polyethylene Pipe (PE-100): (As per specification) (Only for Local Manufacturer having valid ISO-9001 Certification) (Under Single Stage Two Envelope Bidding Procedure). ♦ 40mm, Qty=60,000 Metre. (The bidder is required to submit/upload the valid PEC Certificate mentioned in the Tender Document/Advertisement (where required) along with the bid on EPADS; otherwise, the bid will be liable for rejection. This tender is available on the EPADS link. Bidder(s) should participate in this tender through EPADS. The bidder should download the tender document through EPADS, fill out the BOQ/Bid form/Schedule of Requirement, upload all tender documents duly signed and stamped through EPADS; otherwise, the bid will be liable for rejection.” “The bidder must deposit/submit the physical bid bond to the Tender Room (SSGC HO) before the bid submission Time; otherwise, the bid will be liable for rejection)
Line Pipe Bare 3/4" NB x 0.113" API 5L Grade 'B' PSL-1, WT. Bevelled Ends Small Diameter, Qty=210,000 Metre. (As per specification) (Only for local manufacturer having valid API & ISO9001 Certifications) (Under Single Stage One Envelope Bidding Procedure). (The bidder is required to submit/upload the valid PEC Certificate mentioned in the Tender Document/Advertisement (where required) along with the bid on EPADS; otherwise, the bid will be liable for rejection. This tender is available on the EPADS link. Bidder(s) should participate in this tender through EPADS. The bidder should download the tender document through EPADS, fill out the BOQ/Bid form/Schedule of Requirement, upload all tender documents duly signed and stamped through EPADS; otherwise, the bid will be liable for rejection.” “The bidder must deposit/submit the physical bid bond to the Tender Room (SSGC HO) before the bid submission Time; otherwise, the bid will be liable for rejection)
Hiring Services of Optometrist at SSGC K.T Medical Centre (As per Criteria/TOR/BOQ) (Under Single Stage Two Envelope Bidding Procedure) (On Complete Package Basis).
(The bidder is required to submit/upload the valid PEC Certificate mentioned in the Tender Document/Advertisement (where required) along with the bid on EPADS; otherwise, the bid will be liable for rejection. This tender is available on the EPADS link. Bidder(s) should participate in this tender through EPADS. The bidder should download the tender document through EPADS, fill out the BOQ/Bid form/Schedule of Requirement, upload all tender documents duly signed and stamped through EPADS; otherwise, the bid will be liable for rejection.” “The bidder must deposit/submit the physical bid bond to the Tender Room (SSGC HO) before the bid submission Time; otherwise, the bid will be liable for rejection)
♦ ROOM HEATER (GAS), DOUBLE PLATE BURNER, 22GAUGE M.S. SHEET, BROWN MET, STANDARD SIZE, BURNERS WITH SEPARATE KNOBS., Qty=08 Nos. ♦ BELT ALIGNMENT KIT, RED LASER DIODE, 1xBUILT-INCLASS 2 LASER, & It; 1mW, 632 nM, 3 m at 2 m (9.8 ft at 6.6 ft), BETTER THAN 0,2" % 0,5 mm (0.02 in.), 50 MM to 6000MM (2 in. TO 20 ft) LASER ON/OFF SWITCH, Qty=02 Nos. ♦ TOOL KIT FOR INSTRUMENTS & CONTROL WORK, TOTAL PIECES: 95, 1/4" 6PT., FLANK SOCKETS: 3.2-4-5-5.5-6-7-8-9-10-11-12-13-14 MM, 1/4" BIT (25MML) HEX 3-4-5-6-8 MM, PART # 50230-95, Qty=01 No. The bidder is required to submit/upload the valid PEC Certificate mentioned in the Tender Document/Advertisement (where required) along with the bid on EPADS; otherwise, the bid will be liable for rejection. This tender is available on the EPADS link. Bidder(s) should participate in this tender through EPADS. The bidder should download the tender document through EPADS, fill out the BOQ/Bid form/Schedule of Requirement, upload all tender documents duly signed and stamped through EPADS; otherwise, the bid will be liable for rejection.” “The bidder must deposit/submit the physical bid bond to the Tender Room (SSGC HO) before the bid submission Time; otherwise, the bid will be liable for rejection.
GAS DETECTOR EQUIPMENTS|LPG PORTABLE LEAK DETECTOR, COMBUSTIBLE GASES (METHANE, ETHANE, PROPANE & BUTANE), RANGE 0 - 100% LEL, ACCURACY: < +_5% LEL, 2 STAGE ALARM SETTING: (i.e AT 10% LEL & 20% LEL RECOMMENDED, TEMP: -10 TO 50 DEG. C, Qty=02 Nos. (As per specification) (Under Single Stage One Envelope Bidding Procedure) The bidder is required to submit/upload the valid PEC Certificate mentioned in the Tender Document/Advertisement (where required) along with the bid on EPADS; otherwise, the bid will be liable for rejection. This tender is available on the EPADS link. Bidder(s) should participate in this tender through EPADS. The bidder should download the tender document through EPADS, fill out the BOQ/Bid form/Schedule of Requirement, upload all tender documents duly signed and stamped through EPADS; otherwise, the bid will be liable for rejection.” “The bidder must deposit/submit the physical bid bond to the Tender Room (SSGC HO) before the bid submission Time; otherwise, the bid will be liable for rejection.
♦ HIGH PRECISION CLAMP METER, RANGE: 999.9A, RESOLUTION: 0.1 A, ACCURACY: 2% +_5 DIGITS (45 HZ TO 66 HZ), 2500 A, 1 A (<_2500 A) 0.1 A (<_999.9 A ), ACCURACY: 3% +_ 5 DIGITS, 5HZ TO 500 HZ, Qty=01 No. ♦ HIGH PRECISION MULTIMETER, DC VOLTS: 50.000 mV, 500.OO mV, 5.0000 v, 50.000 V, AC VOLTS: 500.00 V, 1000.0 V, DC CURRENT: 500.00 uA, 5000.0 uA, 50.000 mA, 400.00 AC CURRENT: mA, 5.0000 A, 10.000 A, Qty=01 No. (As per specification) (Under Single Stage One Envelope Bidding Procedure) The bidder is required to submit/upload the valid PEC Certificate mentioned in the Tender Document/Advertisement (where required) along with the bid on EPADS; otherwise, the bid will be liable for rejection. This tender is available on the EPADS link. Bidder(s) should participate in this tender through EPADS. The bidder should download the tender document through EPADS, fill out the BOQ/Bid form/Schedule of Requirement, upload all tender documents duly signed and stamped through EPADS; otherwise, the bid will be liable for rejection.” “The bidder must deposit/submit the physical bid bond to the Tender Room (SSGC HO) before the bid submission Time; otherwise, the bid will be liable for rejection.
ELECTRIC SCOOTER, 1000W, 40-45 KM/H, 60 - 80 KM, GRAPHENE BATTERY (NON-FLAMMABLE), 60V / 26 AH, 6-9 HOURS, DC CONTROLLER, 3.0 - 10" TUBELESS TYRES, REAR DRUM / DISK BRAKES, Qty==03 Nos. (Only for Local Manufacturers / Local Authorized Dealers).
“The bidder is required to submit/upload the valid PEC Certificate mentioned in the Tender Document/Advertisement (where required) along with the bid on EPADS; otherwise, the bid will be liable for rejection. This tender is available on the EPADS link. Bidder(s) should participate in this tender through EPADS. The bidder should download the tender document through EPADS, fill out the BOQ/Bid form/Schedule of Requirement, upload all tender documents duly signed and stamped through EPADS; otherwise, the bid will be liable for rejection.” “The bidder must deposit/submit the physical bid bond to the Tender Room (SSGC HO) before the bid submission Time; otherwise, the bid will be liable for rejection.”
Maintenance & Service Contract for Richo Network Printer SP8300DN, SP8400DN and P801 (As per BOQ)(Under Single Stage One Envelope Bidding Procedure)(On Complete Package Basis).
The bidder is required to submit/upload the valid PEC Certificate mentioned in the Tender Document/Advertisement (where required) along with the bid on EPADS; otherwise, the bid will be liable for rejection. This tender is available on the EPADS link. Bidder(s) should participate in this tender through EPADS. The bidder should download the tender document through EPADS, fill out the BOQ/Bid form/Schedule of Requirement, upload all tender documents duly signed and stamped through EPADS; otherwise, the bid will be liable for rejection.” “The bidder must deposit/submit the physical bid bond to the Tender Room (SSGC HO) before the bid submission Time; otherwise, the bid will be liable for rejection.”
On-Line Gas Chromatograph, C6+ type for determination of Natural Gas Composition, N2 & CO2, Single Stream. T/Item = 02 & T/Qty = 05 Nos. (As per Specification) (Under Single Stage Two Envelope Bidding Procedure). FOB/C&F/FOR(Only for Local Manufacturers as per SRO 827(1)/2001)
Different Types of Hardware Material (i.e. CLOTH MALMAL, COTTON WASTE, EMERY PAPER, MASKING TAPE, POLICATE REMOVAL PAPER, SPRAY GUN & REFLECTIVE TAPE) T/Item=14 & T/Qty=814 . (Under Single Stage One Envelope Bidding Procedure) The bidder is required to submit/upload the valid PEC Certificate mentioned in the Tender Document/Advertisement (where required) along with the bid on EPADS; otherwise, the bid will be liable for rejection. This tender is available on the EPADS link. Bidder(s) should participate in this tender through EPADS. The bidder should download the tender document through EPADS, fill out the BOQ/Bid form/Schedule of Requirement, upload all tender documents duly signed and stamped through EPADS; otherwise, the bid will be liable for rejection.” “The bidder must deposit/submit the physical bid bond to the Tender Room (SSGC HO) before the bid submission Time; otherwise, the bid will be liable for rejection.
Provision, Installation / Testing, Programming, Commissioning & Tagging Of Fully Digital PABX Exchange With Equipment & Accessories @ Khadeji Camp, Qty=01 Job/Lot. (As per specification/BoQ) (Tender is on Complete Package Basis) (The authorized partner should have the highest partnership level as offered by their respective Principals. A copy of valid authorized agency/partnership/dealership/distributorship certificate from their Principals is mandatory to be submitted with the bid) (The quoted equipment should be PTA approved) (Under Single Stage One Envelope Bidding Procedure). “The bidder is required to submit/upload the valid PEC Certificate mentioned in the Tender Document/Advertisement (where required) along with the bid on EPADS; otherwise, the bid will be liable for rejection. This tender is available on the EPADS link. Bidder(s) should participate in this tender through EPADS. The bidder should download the tender document through EPADS, fill out the BOQ/Bid form/Schedule of Requirement, upload all tender documents duly signed and stamped through EPADS; otherwise, the bid will be liable for rejection.” “The bidder must deposit/submit the physical bid bond to the Tender Room (SSGC HO) before the bid submission Time; otherwise, the bid will be liable for rejection.”
Rental Premises for Sub Zonal Office Pir Jo Goth, Having at Least 2 to 5 Rooms Additional Room/Storage Space Would be Added Advantage Admeasuing Total Area of 2500 to 7000 Sq.Ft. The Premises Must Have Sufficient Parking Area (Interested Parties having legally cleared with valid title/ownership documents of premises are Eligible to Participate) (Under Single Stage One Envelope Bidding Procedure).
(The bidder is required to submit/upload the valid PEC Certificate mentioned in the Tender Document/Advertisement (where required) along with the bid on EPADS; otherwise, the bid will be liable for rejection. This tender is available on the EPADS link. Bidder(s) should participate in this tender through EPADS. The bidder should download the tender document through EPADS, fill out the BOQ/Bid form/Schedule of Requirement, upload all tender documents duly signed and stamped through EPADS; otherwise, the bid will be liable for rejection.” “The bidder must deposit/submit the physical bid bond to the Tender Room (SSGC HO) before the bid submission Time; otherwise, the bid will be liable for rejection)
Hiring of Consultancy Services for "Implementation of ISO/IEC 17025: 2017, Standard Requirements Leading to Achieve Accreditation" As Per Details , at Meter Repair Shop (As Per BOQ/Criteria) (Under Single Stage Two Envelope Bidding Procedure) on “Least Cost Method” as per Rule 3(C) of The Procurement of Consultancy Services Regulations 2010 (On Complete Package Basis)
(The bidder is required to submit/upload the valid PEC Certificate mentioned in the Tender Document/Advertisement (where required) along with the bid on EPADS; otherwise, the bid will be liable for rejection. This tender is available on the EPADS link. Bidder(s) should participate in this tender through EPADS. The bidder should download the tender document through EPADS, fill out the BOQ/Bid form/Schedule of Requirement, upload all tender documents duly signed and stamped through EPADS; otherwise, the bid will be liable for rejection.” “The bidder must deposit/submit the physical bid bond to the Tender Room (SSGC HO) before the bid submission Time; otherwise, the bid will be liable for rejection)
CEMENT SULPHATE RESISTANT (SRC), Qty=700 Bag. (Only for Cement local manufacturer & Cement Local authorized dealers) (Under Single Stage One Envelope Bidding Procedure). (The bidder is required to submit/upload the valid PEC Certificate mentioned in the Tender Document/Advertisement (where required) along with the bid on EPADS; otherwise, the bid will be liable for rejection. This tender is available on the EPADS link. Bidder(s) should participate in this tender through EPADS. The bidder should download the tender document through EPADS, fill out the BOQ/Bid form/Schedule of Requirement, upload all tender documents duly signed and stamped through EPADS; otherwise, the bid will be liable for rejection.” “The bidder must deposit/submit the physical bid bond to the Tender Room (SSGC HO) before the bid submission Time; otherwise, the bid will be liable for rejection)
Dewatering Pump with Diesel Engine, Flow: 60-70 GMP, Head: 180- 200 Feet, BHP:6-10, Suction 3 Inch, Discharging 2-1/2 Inch, Fuel Tank Enclosed, Wheel Mounted Canopy, Qty=01 No. (As per specification) (Under Single Stage One Envelope Bidding Procedure).
(The bidder is required to submit/upload the valid PEC Certificate mentioned in the Tender Document/Advertisement (where required) along with the bid on EPADS; otherwise, the bid will be liable for rejection. This tender is available on the EPADS link. Bidder(s) should participate in this tender through EPADS. The bidder should download the tender document through EPADS, fill out the BOQ/Bid form/Schedule of Requirement, upload all tender documents duly signed and stamped through EPADS; otherwise, the bid will be liable for rejection.” “The bidder must deposit/submit the physical bid bond to the Tender Room (SSGC HO) before the bid submission Time; otherwise, the bid will be liable for rejection)
♦Comparator Surface Profile, Qty=04 Nos. ♦ Digital Clamp Meter (AC/DC), Battery Operated Hand Held Rugged, Qty=01 No. ♦ Digital Potential Meter Kit, Digital Readout: +-2 VDC, Accuracy: 0.5% Qty=04 Nos. (As per specification) (Under Single Stage One Envelope Bidding Procedure). (The bidder is required to submit/upload the valid PEC Certificate mentioned in the Tender Document/Advertisement (where required) along with the bid on EPADS; otherwise, the bid will be liable for rejection. This tender is available on the EPADS link. Bidder(s) should participate in this tender through EPADS. The bidder should download the tender document through EPADS, fill out the BOQ/Bid form/Schedule of Requirement, upload all tender documents duly signed and stamped through EPADS; otherwise, the bid will be liable for rejection.” “The bidder must deposit/submit the physical bid bond to the Tender Room (SSGC HO) before the bid submission Time; otherwise, the bid will be liable for rejection)
Battery Cells (Nickle Cadmium) Capacity @ 5 Hour, Rating 600-610 AH Float Voltage 1.4 V/Cell, Qty=20 Nos. (As per specification) (O.E.M Certificate required) (Under Single Stage One Envelope Bidding Procedure). (The bidder is required to submit/upload the valid PEC Certificate mentioned in the Tender Document/Advertisement (where required) along with the bid on EPADS; otherwise, the bid will be liable for rejection. This tender is available on the EPADS link. Bidder(s) should participate in this tender through EPADS. The bidder should download the tender document through EPADS, fill out the BOQ/Bid form/Schedule of Requirement, upload all tender documents duly signed and stamped through EPADS; otherwise, the bid will be liable for rejection.” “The bidder must deposit/submit the physical bid bond to the Tender Room (SSGC HO) before the bid submission Time; otherwise, the bid will be liable for rejection)
SSGC/LP/EPADS/NR/2082554 (SPARE FOR AIR COMPRESSOR): ♦COMPRESSOR KIT PART.NO SKFM901321RS, Qty=01 Set. ♦SCREW COMPRESSOR OIL PART.NO: SCWOBG2, Qty=80 Litre ♦ SERVICE KIT 8000H PART.NO MKFM90132, Qty=01 No. (Under Single Stage One Envelope Bidding Procedure). “The bidder is required to submit/upload the valid PEC Certificate mentioned in the Tender Document/Advertisement (where required) along with the bid on EPADS; otherwise, the bid will be liable for rejection. This tender is available on the EPADS link. Bidder(s) should participate in this tender through EPADS. The bidder should download the tender document through EPADS, fill out the BOQ/Bid form/Schedule of Requirement, upload all tender documents duly signed and stamped through EPADS; otherwise, the bid will be liable for rejection.” “The bidder must deposit/submit the physical bid bond to the Tender Room (SSGC HO) before the bid submission Time; otherwise, the bid will be liable for rejection.”
Spares for Solar Taurus T-60 Gas Turbine Compressors: ♦ Major Class Repair Kit Part No 66403D0200, Qty=01 No. (Under Single Stage One Envelope Bidding Procedure)
(The bidder is required to submit/upload the valid PEC Certificate mentioned in the Tender Document/Advertisement (where required) along with the bid on EPADS; otherwise, the bid will be liable for rejection. This tender is available on the EPADS link. Bidder(s) should participate in this tender through EPADS. The bidder should download the tender document through EPADS, fill out the BOQ/Bid form/Schedule of Requirement, upload all tender documents duly signed and stamped through EPADS; otherwise, the bid will be liable for rejection.” “The bidder must deposit/submit the physical bid bond to the Tender Room (SSGC HO) before the bid submission Time; otherwise, the bid will be liable for rejection.)
♦ Porta Cabin (Two in One) Type. Fully Fabricated with High Tensile Strength, Steel Material, Heavy Duty Lifting Arrangement, Dimension= Length: 40ft., Width: 10ft., Height: 8ft 6 Inch, Qty=03 Nos. ♦Porta Cabin (Three In One) Type. Fully Fabricated with High Tensile Strength, Steel Material, Heavy Duty Lifting Arrangement, Dimension = Length: 40ft., Width: 10ft., Height: 8ft 6 Inch, Qty=02 Nos. ♦Porta Cabin (Toilets & Wash Rooms) Type. Fully Fabricated with High Tensile Strength, Steel Material, Heavy Duty Lifting Arrangement, Dimension=Length: 40ft., Width: 10ft., Height: 8ft 6 Inch, Qty=01 No. (As per specification) (Under Single Stage One Envelope Bidding Procedure) .
“The bidder is required to submit/upload the valid PEC Certificate mentioned in the Tender Document/Advertisement (where required) along with the bid on EPADS; otherwise, the bid will be liable for rejection. This tender is available on the EPADS link. Bidder(s) should participate in this tender through EPADS. The bidder should download the tender document through EPADS, fill out the BOQ/Bid form/Schedule of Requirement, upload all tender documents duly signed and stamped through EPADS; otherwise, the bid will be liable for rejection.” “The bidder must deposit/submit the physical bid bond to the Tender Room (SSGC HO) before the bid submission Time; otherwise, the bid will be liable for rejection.”
♦SPRAY CONTACT CLEANER ELECTRIC RELAY (200ml. TIN), Qty=200 Nos. ♦ CARBON TETRACHLORIDE (CTC) (2.5 kg BOTTLE), Qty=04 Bottle ♦ SPRAY LEAK FINDER, Qty=500 Nos. (Under Single Stage One Envelope Bidding Procedure) (The bidder is required to submit/upload the valid PEC Certificate mentioned in the Tender Document/Advertisement (where required) along with the bid on EPADS; otherwise, the bid will be liable for rejection. This tender is available on the EPADS link. Bidder(s) should participate in this tender through EPADS. The bidder should download the tender document through EPADS, fill out the BOQ/Bid form/Schedule of Requirement, upload all tender documents duly signed and stamped through EPADS; otherwise, the bid will be liable for rejection.” “The bidder must deposit/submit the physical bid bond to the Tender Room (SSGC HO) before the bid submission Time; otherwise, the bid will be liable for rejection)
Bare Line Pipe 24 OD x 0.469 WT, Grade X70, API 5L PSL-2, Qty=40,000 Meters. As per Specification Under Single Stage Two Envelope Bidding Procedure FOB/C&F & FOR(Only for Local Manufacturers)
