PNEUMATIC TOOLS JACK HAMMER PNEUMATIC (PAVEMENT BREAKER) Qty 06 Nos.
For All Contractors/Vendors

Line Pipe Seamless API 5L Grade B 1�, 1/2�, 2�, 4�, 6�, 8�, 10�, 12� Qty=324 Metre.
For All Contractors/Vendors

WORKSHOP TOOLS DIE SET 3/4" TO 1" RATCHET TYPE, PIPE DIE STOCK & DIES PIPE SIZES 1/2, 3/4" & 1" Qty 11 Sets.
For All Contractors/Vendors

LINE PIPE API 5L GRADE `B' 4" NB x 0.188" WT. BEVELLED ENDS SMALL DIAMETER Qty=250,000 (Only for Local Manufacturer having valid API & ISO9001 Certifications.)
For All Contractors/Vendors

Line Pipe API 5L Grade `B' 1" NB X 0.133" WT Bevelled Ends Small Diameter Qty=250,000 Metre (Only for Local Manufacturer having valid API & ISO9001 Certifications.)
For All Contractors/Vendors

Line Pipe API 5L Grade `B' 2" NB X 0.154" WT. Bevelled Ends Small Diameter Qty=250,000 Metre (Only for Local Manufacturer having valid API & ISO9001 Certifications.)
For All Contractors/Vendors

Line Pipe API 5L Grade B 6" NB X 0.188" WT. Bevelled Ends, (Bare), Small Diameter Qty=60,000 Metre (Only for Local Manufacturer having valid API & ISO9001 Certifications.)
For All Contractors/Vendors

Line Pipe API 5L Grade B 3/4" NB X 0.113" WT. SCRD. Ends Small Diameter Qty=200,000 Metre (Only for Local Manufacturer having valid API & ISO9001 Certifications.)
For All Contractors/Vendors

Revamping of SCADA & Telecommunication System works for 7/8 GHz Radio / Telecom Test Link between Karachi Terminal & SITE Office.
For All Contractors/Vendors

Revamping of SCADA System for Microwave Radio Network (14 Nos) Sites.
For All Contractors/Vendors

ELECTRIC WATER COOLERS DISPENSER TYPE WITH 20lit BOTTLE Qty 10 Nos. ELECTRIC WATER COOLERS, PRESSURE TYPE 30GLN (135 Liter) CAPACITY, 220/240 VOLT AC 50HZ Qty 15 Nos. AIRCONDITIONER SPLIT TYPE, 24000BTU, 230VAC, 50HZ, SINGLE PHASE Qty 03 Nos. AIRCONDITIONER SPLIT TYPE, 18000BTU, 230 VAC, 50HZ, SINGLE PHASE Qty 05 Nos
For All Contractors/Vendors

PRE-FABRICATED METER INSTALLATION ASSEMBLY - BRASS
For All Contractors/Vendors

GENERATOR 5KVA, SINGLE PHASE, 230VAC, 50HZ Qty 02 Nos.
For All Contractors/Vendors

SPARES FOR 3/4" SERVICE VALVES RUBBER WASHER FOR 3/4" SERVICE VALVE Qty 20,000 Nos. SPARES FOR REMUS G,1.6 GAS METERS WASHER RUBBER 1.09" OD x 0.875" ID x 0.094" THICK Qty 200000 Nos.
For All Contractors/Vendors

3 Layer PE Coating on 4" Inch Dia MS Line Pipe. Coating Thickness 2.2 MM(Under Single Stage Two Envelope Bidding Procedure) Manufacturers having 3 Layer PE Coating facilities & having API Certification. Total Qty = 450,000. Meters
For All Contractors/Vendors

3 Layer PE Coating on 4" Inch Dia MS Line Pipe. Coating Thickness 2.2 MM(Under Single Stage Two Envelope Bidding Procedure) Manufacturers having 3 Layer PE Coating facilities & having API Certification. Total Qty = 450,000. Meters
For All Contractors/Vendors

3 Layer PE Coating on 6" Inch Dia MS Line Pipe. Coating Thickness 2.2 MM(Under Single Stage Two Envelope Bidding Procedure) Manufacturers having 3 Layer PE Coating facilities & having API Certification.
For All Contractors/Vendors

3 Layer PE Coating on 12.750" OD x 0.250" wt, API 5L, Grade x - 42 Dia Meter MS Line Pipe (PSL-1) Double Random Length with Coating Thickness 2.5 MM.(Under Single Stage Two Envelope Bidding Procedure) Manufacturers having 3 Layer PE Coating facilities & having API Certification.
For All Contractors/Vendors

Security Management System Qty=1139.
For All Contractors/Vendors

ELECTRONIC PRESSURE RECORDER ITEM 01 QTY= 10
For All Contractors/Vendors

Aplication to Provide Assessment Center Services. (Under Single Stage Two Envelop Bidding Procedure)
For All Contractors/Vendors

Standardized Office Furniture Qty=5260 (Pre-Qualified Vendors Only).
Only For Approved Contractors/Vendors

COMPONENTS FOR G4 GALLUS 2000 GAS METERS BOLT FMF WITH NUT 5mm x 35mm.Qty 300,000 Nos. (Pre-Qualified Vendors Only).
Only For Approved Contractors/Vendors

Cathodic Protection Instruments/Equipments Transformer Rectifier, Surface Profile Digital Gauge, Pipeline C-Clamp Meter 4�& 8"Dia, Digital Ultraviolet Temperature Gauge Qty=11
For All Contractors/Vendors

Screw Driver Pneumatic Qty=24.
For All Contractors/Vendors

PAVEMENT BREAKER(ROAD BREAKER), HANDY PNEUMATICALLY OPERATED, WEIGHT 25 KG TO 30 KG, BORE 2-7/12" AND STROKE 5-9/32", BLOWS PER MINUTE 1000 MORE THAN Qty 01 Nos. DISTOMETER, MEASURING ACCURACY +_ 1.0 MM (+_ 0.04"), RANGE 0.05M TO 200M (0.16 TO 650), SMALLEST UNIT DISPLAYED 0.1MM Qty 02 Nos. GRINDER ANGLE, SUITABLE TO CLEAN THE WELDING BEADS OF MS PIPES, DISC SIZE 9" DIA, 2200RPM, MOTOR POWER 2000-2200 WATTS, SPEED 8000 RPM, INSULATED STEEL BODY, FLEXIBLE PVC CABLE WITH PLUG Qty 03 Nos.
For All Contractors/Vendors

Pick-Up Single Cabin/Double Cabin 4 X 4 / 4 X 2 Diesel, 2500 - 3200CC Fully Loaded, Single Cabin 4 X 2 Diesel Engine, 2200 - 2500 CC & Car 1300CC Qty=06 (“Manufacturers & Authorized Dealers Only�.)
For All Contractors/Vendors

Van 'Suzuki Bolan' High Roof & Pick Up 800CC 'Suzuki Ravi' Qty=18 (“Manufacturers & Authorized Dealers Only�.)
For All Contractors/Vendors

Construction of Sales Record Room on Roof Top of Marketing Building at SSGC Head Office. (PEC Valid Certificate for the category C-6 & above).
For All Contractors/Vendors

Construction of Sales Record Room on Roof Top of Marketing Building at SSGC Head Office. (PEC Valid Certificate for the category C-6 & above).
For All Contractors/Vendors

1. Tender documents can be obtained from Tender Room, Ground Floor, CRD Building, Head Office Complex, Sir Shah Suleman Road, Gulshan-e-Iqbal, Karachi-75300 on payment of Rs. 500/- through Pay Order/Demand Draft or SSGC’s Cash Receipt from Monday thru Friday between 0900 hrs. to 1300 hrs.
2. The above tenders are also displayed on websites of PPRA & SSGC.
3. A new Supplier is to provide a copy of GST Registration and NTN Certificate (not applicable for Foreign Tender) with request letter for the issuance of tender documents along undertaking on Rs. 100 non-judicial stamp paper certifying that the supplier is not blacklisted by any Government/Autonomous body and is not a defaulted supplier.
4. Bids will be opened publicly 30 minutes after bid submission time. If the bid opening date falls on holiday, bids will be opened on the next working day at the same time.
5. A bidder is essentially required provide correct and the latest postal, e-mail & web addresses, phone/cell/fax numbers at the time of purchase of tender documents for effective and timely communication.
6. A sufficient time is given as per PP rules for bid submission, bidders are requested to submit bids accordingly.
7. SSGC will appreciate, if the bidders who have collected the tenders shall intimate in writing the reason if they are not participating thru fax 92–21-99231583 or by e-mail: mmte@ssgc.com.pk. For further details, please visit our website www.ssgc.com.pk or contact Mr. Khalid Rathore (Chief Engineer TE) phone: 99021211